The concept of wet sanding is new for many of us and we don’t know what exactly is it. It is a basic technique to reduce, or completely remove scratches from a surface. This article focuses on the details about the same.
Wet sanding is a better alternative to ordinary drywall sanding when it comes to household repair or remodeling. This method is effective and safe, firstly because dry dust is not released into the surrounding air when it is actually happening. So, even for people who are highly allergic to dust can use this method. And secondly, since there is not a lot of dust, so no extra efforts are required to clean up the mess that settles on the furniture. So, it is easy, practical, and feasible, too.
Technically, wet sanding is nothing but a process of dry sanding an inflicted drywall or plaster at the time of repairs in your home. The main ingredient used in sanding is a sanding sponge. It is the ‘tool’ used to sand the patches and blocks on the wall. It often requires rinsing and cleansing! In this article, we discuss an easy way to wet sand wood, the materials required for the same, and other essential tips that help you complete the project effectively.
Wet Sanding Wood
The main objective of sanding wood, or any other wooden furniture is to reduce the usage of liquid sandpaper. Dry sanding with a sandpaper creates a blockage in the material you are trying to remove. It often sticks to the paper and makes your job all the more tough. Wet sanding on the other hand removes the waste material in the blink of an eye and also keeps the sandpaper all clean. When it comes to furniture, merely applying varnishes and paint doesn’t cut it. Achieving a perfectly refurbished surface is an important aspect. The following steps tell you exactly how to do it. You may use this method to work on any kind of furniture.
1. Sand the surface to a 320 grit and remove all the sanding dust from the holes and pores of the furniture. You will have to use compressed air or an ordinary vacuum to do so. Keep a tack cloth at hand to clean the surface.
2. Paste a wood filler to create a smooth, furbished surface on your working piece. Now, mix water and detergent to create a simple solution and wet sand the surface with it. Use a rubber sanding block at the bottom center. In the final step, use an automotive wax to polish the object you are working on.
Tips for Wet Sanding Drywall
- Selecting the Sponge: Sponge selection is the most important aspect of wet sanding. They aren’t heavy weighted at all and are easily available. Since they are light-weight, they are bigger in size, at least bigger than your ordinary kitchen sponge. They can wet and sand the drywall simultaneously. It is advisable to invest in a sponge that tapers at its corners.
- Cleaning the Sponge: Now, a constant usage of the sponge is definitely going to mud the sponge, with all the sediments and particles absorbed in it. So, you will have to clean it often. Ensure to keep a bucket of water to rinse and wring the sponge in frequently. Also, make sure you replace and refill the bucket with freshwater occasionally.
- Using Water: Water isn’t always a good solution to everything. For example, if you use too much water for wet sanding, it will have a substantial effect on the wall and will strikingly reduce the drying time. This would lengthen your working project and ultimately bore you till it is all over. Another aspect of using excessive water is the lifting or turning of the plaster wall. Too much liquid on it would make it all messy. So wring your sponge as often as you can to avoid all this fuss.
Don’t hasten while working on any remodeling project. Understand that effective finessing and refinement of an object takes time.