Wainscoting is described as the wood, usually in the form of panels, which lines the lower portion of an interior wall. It is generally topped with a chair rail.
In olden days, wainscoting used to symbolize wealth and elegance. It was expensive to use it for home decor, and so only rich people could afford it. But this is not the case now, pre-cut wall panels are quite cheap and affordable. There is a huge variety in patterns and lengths, and choosing the right one, can be quite a task.
Full Wall Wainscoting
The main purpose of wainscoting is to add warmth to cold stone walls and to give protection to the room from moisture rising from the foundation of the building. There is no hard and fast rule when it comes to the height of wainscoting. It will depend on your preference.
The standard that most people adhere to is to keep it ⅓rd of the height of the wall. Most wainscoting panels are 30 to 36 inches in height. If your wall is 9 foot or 108 inches, then divide it by 3, the answer, that is 36 inches should be your ideal wainscoting. Easy, right?
Another factor to consider is the purpose of wainscoting. Are you doing it to protect your walls or just to add some architectural elegance? Too much will make your walls looks shorter, hence plan accordingly. Bathroom walls can have high panels, as they are susceptible to more moisture. To protect the walls, you can have high panels in the children's bedroom as well.
Wainscoting panels are generally made of heavy wood, particularly oak. Many people prefer to carve, paint, and glide the panels. Earlier wainscoting panels were built by master carpenters. Each of its sections would include a baseboard, vertical stiles, a wide base rail, flat panels edged with panel molding, a wainscot cap, a wide top rail, or chair rail. The design could be simple or ornate. Nowadays, pre-constructed panels are available in the market. They can be installed even by inexpert and unskilled hands.
There are mainly four different types of wainscoting which you can consider for your home wall decoration. The most common style is the raised panel. It consists of a raised rectangular panel and continuous rails, which runs along the top and bottom. Generally, the wainscoting is done for the one-third of the wall. But if you wish, you may extend up to the ceiling. Such a design should normally have 3 rows of each panel.
One-third Wall Wainscoting in Living Room
There is another type which you can use for bathroom wall panels. It is called flat panel. It is a simple yet elegant looking wainscoting style which is popularly used for staircases. Flat panels are considered to be best for small spaces as they give a clean and decent appearance to an enclosed space. This is different from the raised panel in being deeper than the flat and bottom rail.
The next type is called the bead and board panel. Its use is an awesome idea for bathrooms walls. The breadth of this wainscoting panel is usually 4 feet. Each raised plate is placed side-by-side with a 2-3 inch distance in between each. If you want something to add to the grace of your bathroom decor, board, and bead, wainscoting panel is the thing to opt for.
There is one more type called overlay panel. It is quite stylish and trendy. It resembles raised panels, but comes in smaller frames. The overlay panel has a prominent raised molding.
Half Wall Wainscoting in Bathroom
You can think of a number of ideas for installing wainscot, and thus decorate your house in a more stylish and beautiful way. It will not only make your house look awesome but would also protect it from the undesirable effects of damp coming up from its foundation. You may use the information for implementing some wainscoting ideas in order to decorate your bathroom, living rooms or bedroom, accordingly.